SSH EN 14385:2005

Shkarkimet e burimeve stacionare - Përcaktimi i shkarkimeve të përgjithshme të As. Cd. Cr. Co. Cu. Mn. Ni. Pb. Sb. Tl dhe V

Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V

Scope

This European Standard specifies a manual reference method for the determination of the mass concentration of specific elements in exhaust gases from hazardous waste incinerators. The method is applicable to each of the specific elements in the concentration range of 0,005 mg/m3 to 0,5 mg/m3. Unless otherwise stated, gas volumes are expressed at dry conditions, normalised to 273 K and oxygen content 101,3 kPa, and normalized to a dry oxygen content of 11 % on the volume/volume basis.
Specific elements according to this European standard are antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), manganese (Mn), nickel (Ni), thallium (Tl), and vanadium (V).
This European standard is validated for the determination of the mass concentration of specific ele-ments in incineration exhaust gases with the composition given in Table 1.
This European standard is also applicable for exhaust gases from other sources with a similar flue gas composition.

Related directives

Directives related to this standards.