DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

DS CEN/TR 17005:2016

Qëndrueshmëria e punimeve të ndërtimit - Kategori shtesë të ndikimit në mjedis dhe treguesit - Informacion historiku dhe mundësitë - Vlerësimi i mundësisë së kategorive shtesë të ndikimit në mjedis dhe treguesit përkatës dhe metodat e llogaritjes për vlerësimin e performancës mjedisore të ndërtesave

Sustainability of construction works - Additional environmental impact categories and indicators - Background information and possibilities - Evaluation of the possibility of adding environmental impact categories and related indicators and calculation methods for the assessment of the environmental performance of buildings
27 mar 2017

General information

60.60     31 jan 2017

DPS

DPS/KT 104

Technical Report

91.010.99  

anglisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

This Technical Report (TR) has been developed by CEN/TC 350/WG 1 and WG 3 to provide a clear and structured view on the relevance, robustness and applicability of a predefined set of additional impact categories and related indicators for the assessment of the environmental performance of construction works, construction products and building materials.
The TR describes the evaluation criteria that are used to determine, for these impact categories, the suitability of indicators and calculation method(s) for inclusion in the standards EN 15978 and EN 15804 (or other CEN/TC 350 standards as appropriate) in terms of their:
a) relevance to:
1) the environment,
2) construction works,
3) construction products, and
4) EU policy;
b) scientific robustness and certainty; and
c) applicability of the impact assessment method(s).
The additional impact categories examined in the TR are:
- human toxicity and ecotoxicity;
- particulate matter;
- land use;
- biodiversity;
- water scarcity; and
- ionizing radiation.
Because EN 15978 and EN 15804 are founded on a life cycle approach, the impact categories, indicators and methods reviewed are predominantly based on their potential suitability for application in LCA. In relation to some of the areas of concern, however, where LCA methods might not be sufficiently robust or developed, some non-LCA based indicators and methods are also considered.
Due to the scope of LCA used in the EN 15804 and EN 15978, impacts to users of buildings due to direct exposure to harmful emissions fall outside the scope of this TR. This falls under the scope of CEN/TC 351. Important information related to this aspect found during the development of this TR, is however mentioned in the TR.
Uncertainty is an important issue in LCA. General assessment of the uncertainty related to impact assessment models is considered in the evaluation framework of this TR. However, the TR does not lay down a maximum uncertainty level to be considered acceptable in the context of the CEN standards EN 15804 and EN 15978, nor does it provide exact figures on uncertainties.
Annex A of the TR provides a description of options that may be considered for incorporating selected impact categories/indicator in the standards EN 15978 and EN 15804.
The TR recognizes and takes account of:
- the work done by the European Commission, Joint Research Centre (EC-JRC), in the development of the International Reference Life Cycle Data System (ILCD) Handbook Recommendations,
- other reports and scientific studies into the methods and application of the indicators reviewed,
- findings of specific activities connected with this work such as of the CEN/TC 350 Workshop, held in Brussels on 24-25 June 2014.

Related directives

Directives related to this standards.

305/2011

Rregullorja (BE) Nr. 305/2011 e Parlamentit Evropian dhe e Këshillit e datës 9 Mars 2011 që parashtron kushtet e harmonizuara për tregtimin e produkteve të ndërtimit dhe shfuqizimin e Direktivës së Këshillit KEE/89/106

Life cycle

NOW

PUBLISHED
DS CEN/TR 17005:2016
60.60 Standard published
31 jan 2017

Related project

Adopted from CEN/TR 17005:2016