SSH EN 50065-4-3:2003

Sinjalizues për instalimet elektrike të tensionit të ulët në intervalin e frekuencave 3 - 148.5 kHz - Pjesa 4 - 3 Filtrat e stakimit në tension të ulët - Filtër i hyrjes

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter - Incoming filter

Scope

This standard applies to incoming filters used to control the coupling of signals between the utility area and the consumer area (see Figure 1).
The standard defines
• the minimum impedance in the relevant frequency band(s) at both Utility port and Consumer port,
• the minimum attenuation of unwanted signals transmitted from the utility side to the consumer side and vice versa,
• the transmission characteristics:
- operating frequency domain for both utility side and consumer side,
- attenuation between the utility side and the consumer side and vice versa,
- impedance at the utility side and at the consumer side.
This standard applies to incoming filters designed for and used in single or multiphase installations.