DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

ISO/TS 13399-72:2016

Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange
11 korr 2016

General information

90.93     19 qer 2023

ISO

ISO/TC 29

Technical Specification

35.240.50     25.100.01  

anglisht   frëngjisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

ISO/TS 13399-72:2016 defines the necessary text elements of a drawing frame and determines a standardized data exchange format. Therefore, the effort is reduced for the maintenance of documentation because the content of a drawing header is mated into a specific drawing frame by means of using XML technology and an individual mapping table. The benefit of this concept for manufacturer/supplier and end user is the advantage of a central maintenance of the appropriate templates.
It covers the following:
- identification and definition of the data fields;
- identification and definition of the structure of the data fields;
- structure of the data exchange file.
The standardization of drawing formats, e.g. drawing frame, structure of the bill of material, are outside the scope of ISO/TS 13399-72:2016 which is rather more intended to standardize the data exchange of the product documentations.
The following are outside the scope of ISO/TS 13399-72:2016;
- layer settings as defined in ISO/TS 13399‑70;
- structure of the tool documentation as defined in ISO/TS 13399‑71;
- applications where these standard data may be stored or referenced;
- concept of the classification of cutting tool data and their properties;
- concept of the design of 2D drawings for cutting tools;
- concept of the design of 3D models for cutting tools;
- application data for the use of those cutting tools;
- information about the reconditioning of cutting tools;
- information about additional application and usage data (e.g. coolant supply).

Life cycle

NOW

PUBLISHED
ISO/TS 13399-72:2016
90.93 Standard confirmed
19 qer 2023