ISO 286-2:2010

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Publication date: 7 qer 2010

General information

Current stage: 90.93 Effective date: 9 qer 2021

Originator: ISO

Owner: ISO/TC 213

Type: International Standard

ICS: 17.040.10

Gjuha: anglisht frëngjisht rusisht

Buying

Statusi: Publikuar

PDF - 21 936 Lekë

Paper - 21 936 Lekë

CD - 21 936 Lekë

Language

Language in which you want to receive the document.

Scope

ISO 286-2:2010 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286‑1. ISO 286-2 covers values for the upper limit deviations eU, hole (for holes) and eU, shaft (for shafts) and the lower limit deviations eL, hole (for holes) and eL, shaft (for shafts).
The ISO system for tolerances on linear size provides a system of tolerances and deviations suitable for features of the following types:

cylinders;
two parallel opposite surfaces.

For simplicity, and also because of the importance of cylindrical workpieces of circular section, only these are referred to explicitly. It should be clearly understood, however, that the tolerances and deviations given in ISO 286-2 equally apply to workpieces of other than circular sections.

Life cycle

PREVIOUSLY

WITHDRAWN
ISO 286-2:1988

WITHDRAWN
ISO 286-2:1988/Cor 1:2006

ABANDON
ISO 286-2:1988/DAmd 1

NOW

PUBLISHED
ISO 286-2:2010
90.93 Standard confirmed
9 qer 2021

CORRIGENDA / AMENDMENTS

PUBLISHED
ISO 286-2:2010/Cor 1:2013

National adoptions

SSH ISO 286-2:2010

DPS

Specifikime të përgjithshme të produktit (GPS) - Sistemi i kodit ISO për tolerancat në përmasat lineare - Pjesa 2: Tabelat e klasave standarde të tolerancës dhe devijimet kufitare për vrimat dhe boshtet

60.60 Standard published

DPS/KT 336 më tepër