DPS
Drejtoria e Përgjithshme e Standardizimit
Phone: +355 4 222 62 55
E-mail: info@dps.gov.al
Address: Address: "Reshit Collaku" Str., (nearby ILDKPKI, VI floor), Po.Box 98, Tiranë - Albania
Main menu

SSH ISO 21984:2018

Ships and marine technology - Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships

Dec 23, 2019

General information

60.60     Nov 11, 2019

DPS

DPS/KT 320

Pure national standard

47.020.01     17.160  

English  

Buying

Published

Language in which you want to receive the document.

Scope

This document gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on board ships satisfying one or both of the following conditions:

a) 2-stroke cycle, long-stroke, low-speed diesel engine directly coupled to the fixed-pitch propulsion propeller is installed.

b) length of deck house (L) is limited as compared with its height (H) (i.e. deck house of around 1,0 and above in slenderness ratio of H to L). An example of length of deck house (L) and its height (H) for slenderness ratio is shown in Annex A.

Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guidance values for different spaces on ships.

This document is applicable to specific ships with intended voyages of 24 h or more.

This document specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.

This document is not applicable to machinery spaces, other than engine control rooms, where persons do not stay for prolonged periods of time.

ISO 20283-5 is generally applicable to all ships. Requirements for measurement, evaluation and reporting of vibration with regard to habitability for all persons on board passenger and merchant ships, including specific ships to which this document may also be applicable can be found in ISO 20283-5. This document is neither complementary nor additional but supplementary to ISO 20283-5. The shipbuilder can select either this document or ISO 20283-5 to apply to any specific ship upon due consideration to individual design conditions of the ship and, if any, experience in building sister or similar ships, and that particular selection is intended to be agreed on by the shipowner.

The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631-1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283-2.

Life cycle

NOW

PUBLISHED
SSH ISO 21984:2018
60.60 Standard published
Nov 11, 2019