DPS
Drejtoria e Përgjithshme e Standardizimit
0 Produkte
Llogaria ime
E-albania
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

ISO 21360-4:2018

Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 4: Turbomolecular vacuum pumps
31 korr 2018

General information

90.92     14 qer 2024

ISO

ISO/TC 112

International Standard

23.160  

anglisht   frëngjisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

This document, in conjunction with ISO 21360-1, specifies methods for the measurement of performance characteristics of turbomolecular vacuum pumps. It is applicable to all sizes and all types of turbomolecular vacuum pumps, including those
— with mechanical or magnetic bearings;
— with or without an additional drag stage(s) or other pumping stages on the shaft;
— with one or more inlet ports.
Since turbomolecular vacuum pumps are backed by primary pumps, their performance cannot be completely defined by the volume flow rate curve. Also, the driving device and the backing pressure of the turbomolecular vacuum pump is important to the performance.
The following completes the performance characteristics:
— information about throughputs and backing pressure of the turbomolecular vacuum pump;
— the compression ratio curve (compression ratio vs backing pressure of turbomolecular vacuum pump).

Life cycle

NOW

PUBLISHED
ISO 21360-4:2018
90.92 Standard to be revised
14 qer 2024

REVISED BY

IN_DEVELOPMENT
ISO/AWI 21360-4