DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

SSH EN 1501-3:2021

AAutomjete për mbledhjen e mbeturinave - Kërkesa të përgjithshme dhe kërkesa sigurie - Pjesa 3: Automjete për mbledhjen e mbeturinave me ngarkesë nga përpara

Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
27 shk 2026

General information

60.60     27 shk 2026

95.99   

DPS

DPS/KT 230

European Norm

43.160  

shqip  

Buying

Publikuar

Language in which you want to receive the document.

Scope

This document applies to a front loaded refuse collection vehicle (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its intended function and can be operated, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
This document describes and defines the safety requirements of the front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in EN 1501 5:2021.
Safety requirements for loader cranes are defined in EN 12999:2020. Additional specific requirements to loader cranes installed on RCVs are defined in EN 1501 5:2021.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
- operation in severe conditions, e.g. extreme environmental conditions such as:
- below −20 °C and above +40 °C temperatures;
- tropical environment;
- wind velocity in excess of 75 km/h;
- contaminating environment;
- corrosive environment;
- operation in potentially explosive atmospheres;
- handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
- operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Related directives

Directives related to this standards.

2006/42/EC

Direktiva 2006/42/EC e Parlamentit Europian dhe e Këshillit të 17 majit 2006 për makinerinë, dhe amendimi i Direktivës 95/16/EC (rinovim)

Të harmonizuara

Life cycle

PREVIOUSLY

WITHDRAWN
SSH EN 1501-3:2008

NOW

PUBLISHED
SSH EN 1501-3:2021
60.60 Standard published
27 shk 2026

Related project

Adopted from EN 1501-3:2021 IDENTICAL