DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

SSH EN 1715-1:2007

Alumini dhe lidhjet e aluminit - Copa të tërhequra - Pjesa 1: Kërkesa të përgjithshme dhe kushtet teknike për kontrollin dhe shpërndarjen

Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery
95.99 Withdrawal of Standard   16 maj 2014

General information

95.99     16 maj 2014

DPS

DPS/KT 133

European Norm

77.150.10  

Scope

This part of EN 1715 specifies the general drawing stock characteristics to be satisfied by unalloyed aluminium and aluminium alloy drawing stock delivered in the form of coils with a unit weight ranging between 1 t and 3 t and obtained by common industrial processes. It also specifies the technical conditions for inspection and delivery of these products. These general characteristics and conditions apply to drawing stock intended for the following three main fields of application: - electrical conductors of aluminium and aluminium alloys; - wires for general mechanical uses; - wires for brazing and welding. The specific requirements to drawing stock for these applications are specified in parts 2, 3 and 4 of EN 1715. It does not apply to wires which are drawn, but only to drawing stock which is produced by hot-working. NOTE 1 : Manufacture of drawing stock: two main methods exist for the manufacture of drawing stock: - continuously Cast Rod - (CCR): a section is cast continuously in the groove of a wheel, the groove being closed by an endless strip; the solid and still hot section is rolled in a multistand rolling mill to the required diameter; the drawing stock rod thus produced is wound continuously to form coils 1 t to 3 t in weight; - hot rolled Rod - (HRR): a wirebar of diameter 100 mm to 150 mm is heated and rolled to the required diameter; the coils produced, weighing up to about 100 kg are butt welded together and wound to form coils with unit weight of 1 t to 3 t. NOTE 2 : It is also possible to obtain drawing stock by extrusion.

Related directives

Directives related to this standards.

97/23/EC

Pajisje të trysnisë

Life cycle

NOW

WITHDRAWN
SSH EN 1715-1:2007
95.99 Withdrawal of Standard
16 maj 2014

REVISED BY

PUBLISHED
SSH EN 1715-1:2008

Related project

Adopted from EN 1715-1:1997

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login