SSH EN 15182-3:2019

Pajisje që mbahen në dorë për shpërndarjen e agjentëve shuarës që pompohen nga pompa zjarri - Kokat metalike të tubave kundër zjarrit për përdorim manual - Pjesa 3: Kokat me vrimë hedhje të drejtmë dhe/ose me shpërndarje me një kënd fiks PN 16

Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16

Scope

In addition to the requirements given in EN 15182-1:2019, this document applies to hand-held branchpipes with smooth bore jet and/or one fixed spray jet angle branchpipes with a nominal pressure of 16 bar (1,6 MPa) PN 16, with a maximum flow rate up to 1 000 l/min at a reference pressure of 6 bar (0,6 MPa). It deals with:

- safety requirements;
- performance requirements;
- test methods.

This document applies to branchpipes as defined in Annex A of EN 15182-1:2019.

WARNING 1: These branchpipes offer no or inadequate protection for firefighters when the spray angle is less than 30° and therefore, are not be used in high risk firefighting situations such as internal attack.

WARNING 2: These branchpipes should not be used when fighting fires in or near electrical installations when the spray angle is less than 30° without written authorization from the manufacturer in the manual. This authorization from the manufacturer includes safety distances.