SSH EN 302 065-4 V1.1.1 :2016

Pajisje me Rreze të Shkurtër (SRD) që përdorin teknologjinë me Bandë Ultra të Gjerë (UWB); Standard i harmonizuar që mbulon kërkesat thelbësore të artikullit 3.2 të Direktivës 2014/53EU; Pjesa 4: Pajisje për Zbulimin e Materialit duke përdorur teknologji UWB poshtë 10,6 GHz

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz

Scope

The present document specifies the requirements for material sensing applications using UWB technology operating in
all or part of the frequency band from 2,2 GHz to 8,5 GHz. Additionally, it specifies reduced emissions in the ranges
from 0,96 GHz to 2,2 GHz and 8,5 GHz to 10,6 GHz.
The present document applies to:
1) Material Sensing devices: a device enabling radio determination application designed to detect the location of
objects within a structure or to determine the physical properties of a material.
2) Equipment fitted with a non-user changeable antenna.
3) The main categories are:
a) Non fixed material sensors;
b) Non fixed building material sensors;
c) Fixed material sensors.
The present document does not apply to:
• UWB communication devices;
• Ground and wall probing radar devices;
• Through-wall radar imaging devices; and
• (Tank) Level Probing devices.
Equipment covered by the present document operates in accordance with ECC/DEC(07)01 [i.7] and Commission
Decision 2014/702/EU [i.12].
These radio equipment types are capable of operating in all or part of the frequency bands given in table 1.
Table 1: Permitted range of operation [i.12]
Intended frequency bands
Transmit 2,2 GHz to 8,5 GHz
Receive 2,2 GHz to 8,5 GHz
Permitted range of operation
Transmit 30 MHz to 10,6 GHz
Receive 30 MHz to 10,6 GHz
NOTE: The UWB radio device can also operate outside of the intended range of operation and
inside the permitted range of operation provided that the limits in clause 4.3.2 and 4.3.4.2,
table 2 or table 3 are met.