SSH EN 301 489-12 V1.2.1:2003

Çështjet e pajtueshmërisë Elektromagnetike dhe të spektrit të Radios (ERM); Standard i Pajtueshmërisë Elektromagnetike (EMC) për shërbimet dhe pajisjet radio; Pjesa 12: Kushte specifike për Terminalet me Hapje Shumë të Vogël, Stacionet Tokësore Interaktive Satelitore që punojnë në diapazonin e frekuencave ndërmjet 4 GHz dhe 30 GHz në Shërbimin Satelitor të Fiksuar (FSS)

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)

Scope

The present document, together with EN 301 489-1 [1], covers the assessment of Earth Stations (ES) operated in the
frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) and associated ancillary equipment
in respect of Electromagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of the Earth Stations (ES) are
not included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and the performance criteria for
the ESs, and associated ancillary equipment.
Definitions of the type of Earth Stations (ES) operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed
Satellite Service (FSS) covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any special conditions included in the present document. The applicable
environments referred to in EN 301 489-1 [1] where equipment covered by the scope of the present document may be
used, shall be declared by the manufacturer.