SSH EN 62047-12:2011

Pajisje gjysëmpërçuese - Pajisje mikro-elektromekanike - Pjesa 12: Metodë prove për lodhjen në përkulje të materialeve në formë flete të hollë duke përdorur vibracionin e tingullit në strukturat microelektromekanike (MEMS)

Semiconductor devices - Micro-electromechanical devices - Part 12: Bending fatigue testing method of thin film materials using resonant vibration of MEMS structures

Scope

IEC 62047-12:2011 specifies a method for bending fatigue testing using resonant vibration of microscale mechanical structures of MEMS (micro-electromechanical systems) and micromachines. This standard applies to vibrating structures ranging in size from 10 μm to 1 000 μm in the plane direction and from 1 μm to 100 μm in thickness, and test materials measuring under 1 mm in length, under 1 mm in width, and between 0,1 μm and 10 μm in thickness. The main structural materials for MEMS, micromachine, etc. have special features, such as typical dimensions of a few microns, material fabrication by deposition, and test piece fabrication by means of non-mechanical machining, including photolithography. The MEMS structures often have higher fundamental resonant frequency and higher strength than macro structures. To evaluate and assure the lifetime of MEMS structures, a fatigue testing method with ultra high cycles (up to 10¹²) loadings needs to be established. The object of the test method is to evaluate the mechanical fatigue properties of microscale materials in a short time by applying high load and high cyclic frequency bending stress using resonant vibration.