DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

SSH EN 12753:2005+A1:2010

Sistemet e pastrimit termik për gazet e shkarkur nga pajisjet e trajtimit të sipërfaqes - Kërkesat e sigurisë

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
4 pri 2011

General information

60.60     4 pri 2011

DPS

DPS/KT 114

European Norm

13.040.40     25.220.01  

anglisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

This European Standard is applicable to thermal cleaning systems for exhaust gas from surface treatment equipment/systems as given below in which the concentration of exhaust gas to be cleaned (for the purpose of this European Standard, named "process gas") at the inlet to the thermal cleaning system is safely limited within the concentration ranges given in 5.2.2.2.
Surface treatment equipment includes:
- dryers according to EN 1539, curing equipment;
- flash-off areas;
- coating plants (e.g. closed spray booths, open fronted spray booths);
- machines using flammable solvents for the pre-treatment and cleaning of products or equipment (e.g. barrels, tins, cans or containers);
- related solvent handling equipment.
This European Standard deals only with the significant hazards from fire and explosion and hazards generated by residual process gases as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.
The types of thermal cleaning systems covered in this European Standard are
- direct combustion, and
- catalytic combustion
(see definitions in 3.1.1 and 3.1.2).
This European Standard applies in conjunction with the relevant requirements of EN 746-1 and EN 746-2.
For the purpose of this European Standard a thermal cleaning system for process gas contains the following components: fan(s), heat exchanger, process space, main and supporting burner, injection system, power driven dampers, control and power circuits joined together for the processing of flammable substances, predominantly volatile organic compounds, by effecting oxidation.
NOTE Thermal cleaning equipment is usually integrated with systems as covered by e.g. EN 1010-1, EN 1539, EN 12215, EN 12921-1 or EN 12921-3.
1.2 This European Standard is not applicable to:
- thermal paint removal systems;
- pyrolytic systems.

Related directives

Directives related to this standards.

98/37/EC

Makineria

2006/42/EC

Direktiva 2006/42/EC e Parlamentit Europian dhe e Këshillit të 17 majit 2006 për makinerinë, dhe amendimi i Direktivës 95/16/EC (rinovim)

Të harmonizuara

Life cycle

PREVIOUSLY

WITHDRAWN
SSH EN 12753:2007

NOW

PUBLISHED
SSH EN 12753:2005+A1:2010
60.60 Standard published
4 pri 2011

Related project

Adopted from EN 12753:2005+A1:2010