SSH EN 14351-1:2006+A1:2010

Dyer dhe dritare - Standardi i produktit, karakteristika të performancës - Pjesa 1: Dritaret dhe dyert e jashtme të daljes së këmbësorëve pa rezistencë ndaj zjarrit dhe/ose karakteristika të filtrimit të tymit

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

Scope

This European Standard identifies material independent performance characteristics that are applicable to win-dows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens.
This European Standard applies to:
- Manually or power operated windows, French windows and screens for installation in vertical wall aper-tures and roof windows for installation in inclined roofs, complete with:
- related hardware, if any;
- weather stripping, if any;
- glazed apertures when intended to have glazed apertures;
- with or without incorporated shutters and/or shutterboxes and/or blinds;
and manually or power operated windows, roof windows, French windows and screens that are
- fully or partially glazed including any non-transparent infill;
- fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding).
- Manually operated external pedestrian doorsets with flush or panelled leaves, complete with:
- integral fanlights, if any;
- adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
- windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 14351-3);
- rooflights according to EN 1873 and prEN 14963;
- curtain walling according to EN 13830;
- industrial, commercial and garage doors and gates according to EN 13241-1;
- internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance re-quirements given in clause 4 can be relevant for internal doors (see prEN 14351-2);
- revolvin

Related directives

Directives related to this standards.