Publikuar
Specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. The apparatus is given in EN 60332-1-1. NOTE 1 Testing to EN 60332-1-2 may be performed simultaneously with that to EN 60332-1-3 if required. Recommended requirements for performance are given in Annex A. EN 60332-1-2 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm² total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed. In these cases, the procedure given in EN 60332-2-2 is recommended. NOTE 2 Since the use of insulated conductor or cable which retards flame propagation and complies with the recommended requirements of this standard is not sufficient by itself to prevent propagation of fire under all conditions of installation, it is recommended that wherever the risk of propagation is high, for example in long vertical runs of bunches of cables, special installation precautions should also be taken. It cannot be assumed that because the sample of cable complies with the performance requirements recommended in this standard, that a bunch of cables will behave in a similar manner. (See EN 60332-3 series.) Has the status of a group safety publication in accordance with IEC Guide 104.
Directives related to this standards.
Direktiva 2006/95/EC e Parlamentit Europian dhe e Këshillit e 12 dhjetorit 2006 mbi harmonizimin e ligjeve të Shteteve anëtare lidhur me pajisjet elektrike të projektuara për përdorim brenda disa kufijve të tensionit të caktuar (versioni i kodifikuar)
Të harmonizuaraDirektiva e BE 2014/35 e Parlamentit Europian dhe e Këshillit e datës 26 Shkurt 2014 mbi harmonizimin e ligjeve të Shteteve Anëtare lidhur me vënien në dispozicion të tregut të pajisjeve elektrike të destinuara për përdorim brenda disa kufijve të caktuar të tensionit
Të harmonizuara
PUBLISHED
SSH EN 60332-1-2:2004
60.60
Standard published
1 jan 2008
PUBLISHED
SSH EN 60332-1-2:2004/A12:2020