SSH CEN/TS 14966:2005

Pllaka me bazë druri - Metoda prove të një saktësie jo të lartë për disa veti mekanike

Wood-based panels - Small scale indicative test methods for certain mechanical properties

Scope

This Technical Specification specifies small-scale test methods for estimating the following mechanical properties of wood-based panels:
- indicative planar shear strength (sometimes referred to as block shear);
- indicative panel shear strength;
- indicative strength and modulus of elasticity in tension in the plane of the panel;
- indicative strength in compression in the plane of the panel.
Reference should be made to EN 310 for bending properties. For plywood, EN 314 1 may also be used as an indicator of planar shear strength.
These test methods are intended for indicative purposes only and should not be used as a means of determining structural design values. They may not be suitable for all panel types. They may be used as a means of supporting quality control procedures for structural panels, if correlations with EN 789 test results can be established (CEN Technical Report in preparation).

Related directives

Directives related to this standards.