Use the form below to find the searched projects. Enter your criteria for searching (single or in combination) in the fields below and press the button “Search”.
Welding — General tolerances for welded constructions — Dimensions for lengths and angles, shape and position
60.60 Standard published
Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
90.93 Standard confirmed
Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.20 Standard under periodical review
Pen systems — Part 1: Glass cylinders for pen-injectors for medical use
90.92 Standard to be revised
Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use
90.92 Standard to be revised
Pen systems — Part 3: Seals for pen-injectors for medical use
90.93 Standard confirmed
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
60.60 Standard published
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method
90.60 Close of review
Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emission spectrometric method
90.93 Standard confirmed
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
90.93 Standard confirmed
Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method
90.93 Standard confirmed
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
90.93 Standard confirmed
Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method
60.60 Standard published
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method
90.93 Standard confirmed
Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method
90.93 Standard confirmed
English