SSH EN 14462:2007

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Scope

This standard specifies all the information necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the airborne noise emission of surface treatment machines as stated in annex A. Surface treatment machines include such as but not limited to
¾ machines for cleaning and pretreatment of industrial item surfaces,
¾ machinery for coating and colour mixing,
¾ coating plants
and
¾ dryers, ovens and evaporating equipment.
This standard describes the determination of emission sound pressure levels at work stations or other specified positions as well as the determination of sound power levels for surface treatment machines as stated in annex A. This can be small single units (e.g. handheld atomising spraying equipment) and also complex machines with large dimensions (e.g. machines for cleaning and pretreatment of industrial item surfaces, spray booths, dryers), which could also be linked.
In case of very large machines as defined in 3.10 the determination of sound power level may be very complicated or cannot be done with a reasonable amount of work. Therefore in this standard, the measurement for very large machines is simplified by determining an averaged emission sound pressure level instead of the sound power level.
This standard specifies noise measurement methods, installation/mounting and operation conditions that shall be used for the test. The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used (see 5.1 and 6.1). Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3).
For continuous flow dryers for paper, board and foil (see prEN 13023).
This standard applies to surface treatment machines manufactured after the date of issue of this standard.

Related directives

Directives related to this standards.