ISO 12004-2:2021

Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory

Publication date: 10 shk 2021

General information

Current stage: 90.20 Effective date: 15 jan 2026

Originator: ISO

Owner: ISO/TC 164/SC 2

Type: International Standard

ICS: 77.040.10

Gjuha: anglisht frëngjisht

Buying

Statusi: Publikuar

PDF - 17 978 Lekë

Paper - 17 978 Lekë

CD - 17 978 Lekë

Language

Language in which you want to receive the document.

Scope

This document specifies testing conditions for use when constructing a forming-limit curve (FLC) at ambient temperature and using linear strain paths. The material considered is flat, metallic and of thickness between 0,3 mm and 4 mm.
NOTE The limitation in thickness of up to 4 mm is proposed, giving a maximum allowable thickness to the punch diameter ratio.

Life cycle

PREVIOUSLY

WITHDRAWN
ISO 12004-2:2008

NOW

PUBLISHED
ISO 12004-2:2021
90.20 Standard under periodical review
15 jan 2026

Preview

Vetëm seksionet informative të projekteve janë në dispozicion të publikut. Për të parë përmbajtjen e plotë, do t'ju duhet të krijoni një llogari. Nëse jeni anëtar, ju lutemi hyni në llogarinë tuaj duke klikuar në butonin "Identifikohu".