DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

ISO/TS 6336-22:2018

Calculation of load capacity of spur and helical gears — Part 22: Calculation of micropitting load capacity
29 gush 2018

General information

90.20     15 korr 2021

ISO

ISO/TC 60/SC 2

Technical Specification

21.200  

frëngjisht   anglisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

This document describes a procedure for the calculation of the micropitting load capacity of cylindrical gears with external teeth. It has been developed on the basis of testing and observation of oil-lubricated gear transmissions with modules between 3 mm and 11 mm and pitch line velocities of 8 m/s to 60 m/s. However, the procedure is applicable to any gear pair where suitable reference data are available, providing the criteria specified below are satisfied.
The formulae specified are applicable for driving as well as for driven cylindrical gears with tooth profiles in line with the basic rack specified in ISO 53. They are also applicable for teeth conjugate to other basic racks where the virtual contact ratio (εαn) is less than 2,5. The results are in good agreement with other methods for normal working pressure angles up to 25°, reference helix angles up to 25° and in cases where pitch line velocity is higher than 2 m/s.
This document is not applicable for the assessment of types of gear tooth surface damage other than micropitting.

Life cycle

PREVIOUSLY

Revises
ISO/TR 15144-1:2014

NOW

PUBLISHED
ISO/TS 6336-22:2018
90.20 Standard under periodical review
15 korr 2021

National adoptions

Llogaritja e aftësisë mbajtëse të rrotave të dhëmbëzuara dhëmbëdrejtë dhe helikoidale - Pjesa 22: Llogaritja e kapacitetit të ngarkesës me mikrogropë

40.20 DIS ballot initiated: 12 weeks

DPS/KT 74 më tepër

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login