ISO 6162-2:2018

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76

Publication date: 22 shk 2018

General information

Current stage: 90.93 Effective date: 7 qer 2023

Originator: ISO

Owner: ISO/TC 131/SC 4

Type: International Standard

ICS: 23.100.40

Gjuha: anglisht frëngjisht

Buying

Statusi: Publikuar

PDF - 14 586 Lekë

Paper - 14 586 Lekë

CD - 14 586 Lekë

Language

Language in which you want to receive the document.

Scope

ISO 6162-2:2018 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar[1]). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.
ISO 6162-2:2018 also recognizes the need to accommodate metric screw fasteners (type 1) (for DN 13 to DN 76), as well as to provide a means to use existing inch screw fasteners (type 2) (for DN 13 to DN 51).
These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.

[1] 1 bar = 0,1 MPa = 105 Pa; 1 Pa = 1 N/m2.

Life cycle

PREVIOUSLY

Revises
ISO 6162-2:2012

NOW

PUBLISHED
ISO 6162-2:2018
90.93 Standard confirmed
7 qer 2023

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.