DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

ISO 19360:2016

Ships and marine technology — Marine cranes — Technical requirements for rigging applications
18 nën 2016

General information

60.60     18 nën 2016

ISO

ISO/TC 8/SC 4

International Standard

47.020.40  

anglisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes.
ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes.
ISO 19360:2016 specifies the implementation criteria of installation, maintenance, inspection and discards for running rigging and standing rigging of marine cranes.
ISO 19360:2016 is applicable to the following types of marine crane:
- deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions;
- floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or sheltered water conditions;
- engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditions.
ISO 19360:2016 does not apply to the following:
- loads from accidents or collisions;
- lifting operations below sea level;
- cranes which are supposed to be included in the class of the vessel and where the vessel receives a crane class notation; the contents of this document may be used however, as recommendation or guidance;
- other items where there is the danger that they might be considered in-scope are excluded from this document, such as

- loose gear items, such as the hook block, and
- ropes and fittings;

- cranes which are to be included in class by the class society;
- minimum ambient operating temperatures no less than −20 �C;
- maximum ambient operating temperatures above +45 �C;
- transport, assembly, dismantling and decommissioning of cranes;
- lifting accessories, i.e. any item between the crane and the load;
- lifting operations involving more than one crane;
- hand powered cranes;
- emergency rescue operations;
- shore-side cargo handling cranes;
- portable cranes on board;
- lifting appliances for lifeboats, liferafts accommodation ladders and pilot ladders;
- launching appliances for survival craft and rescue boats;
- gangways, accommodation and pilot ladders and their handling appliances.

Life cycle

NOW

PUBLISHED
ISO 19360:2016
60.60 Standard published
18 nën 2016

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login