DPS
Drejtoria e Përgjithshme e Standardizimit
0 Produkte
Llogaria ime
E-albania
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

IEC TS 61462:1998 ED1

Composite insulators - Hollow insulators for use in outdoor and indoor electrical equipment - Definitions, test methods, acceptance criteria and design recommendations
27 nën 1998

General information

99.60     23 shk 2007

IEC

TC 36

Technical Specification

29.080.10  

anglisht   frëngjisht   spanjisht  

Buying

Replaced

Language in which you want to receive the document.

Scope

Applies to composite hollow insulators consisting of a load bearing insulating tube made of resin impregnated fibres, a housing (outside the insulating tube) made of elastomeric material (for example silicone or ethylene-propylene) and metal fixing devices at the ends of the insulating tube. Composite hollow insulators as defined in this report are intended to be used under conditions involving internal pressure or free of pressure. They are intended for use in outdoor or indoor electrical equipment operating on alternating current with a rated voltage greater than 1 000 V and a frequency not greater than 100 Hz or for use in direct current equipment with a rated voltage greater than 1 500 V.

Life cycle

NOW

WITHDRAWN
IEC TS 61462:1998 ED1
99.60 Withdrawal effective
23 shk 2007

REVISED BY

PUBLISHED
IEC 61462:2023 ED2