DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

IEC 60122-2:2025 ED3

Quartz crystal units of assessed quality - Part 2: Guidelines for the use
27 qer 2025

General information

60.60     27 qer 2025

IEC

TC 49

International Standard

31.140  

anglisht   frëngjisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

IEC 60122-2:2025 has been compiled in response to a generally expressed desire on the part of both users and manufacturers for guidelines to the use of quartz crystal units for filters and oscillators so that the crystal units may be used to their best advantage.
It draws attention to some of the more fundamental questions which will be considered by the user before it places its order for a unit for a new application, and in so doing will, it is hoped, help ensure against unsatisfactory performance, unfavourable cost and non-availability. It is not the function of this document to explain theory, nor to attempt to cover all the eventualities that can arise in practical circumstances. Lastly, it it is not considered as a substitute for close liaison between manufacturer and user.
Standard specifications, such as those of the IEC of which these guidelines form a part, and national specifications or detail specifications issued by manufacturers, will define the available combinations of the resonant characteristics and the temperature characteristic. These specifications are compiled to include a wide range of quartz crystal units with standardized performances. It cannot be over-emphasized that it is the responsibility of the user , wherever possible, to select the quartz crystal units from these specifications, when available, even if it can lead to making small modifications to the circuit to enable the use of standard resonators. This applies particularly to the selection of the nominal frequency.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of SC cut type and related requirements;
b) addition of ageing calculation and low level of drive requirements according to the general specification,
c) update of the frequency temperature curve according to the common cut requirements;
d) removal of infrequently used product types.

Life cycle

PREVIOUSLY

WITHDRAWN
IEC 60122-2:1983 ED2

NOW

PUBLISHED
IEC 60122-2:2025 ED3
60.60 Standard published
27 qer 2025

National adoptions

Njësitë kristalore prej kuarci me cilësi të vlerësuar - Pjesa 2: Udhëzues për përdorim

40.20 DIS ballot initiated: 12 weeks

DPS/KT 7 më tepër

Njësitë kristalore prej kuarci për kontrollin dhe përzgjedhjen e frekuencës - Pjesa 2: Guidë për përdorimin e njësive kristalore prej kuarci për kontrollin dhe përzgjedhjen e frekuencës

40.20 DIS ballot initiated: 12 weeks

DPS/KT 7 më tepër