SSH EN 50377-6-1:2002

Komplete bashkues dhe komponentë ndërlidhës për përdorim në sisteme komunikimi me fibër optike - Specifikime të produkteve - Pjesa 6 - 1: Fibër multimodial tip SC - RJ përfshirë në kategorinë A1a dhe A1b IEC 60793 - 2

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre

Scope

1.1 Product definition
This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode resilient alignment sleeve SC-RJ connector set (plug / adaptor / plug) must meet in order for it to be categorised as an EN standard product.

Product marking details are given in 3.5.
1.2 Intermateability
Products conforming to the requirements of this specification will intermate and give the specified level of random attenuation and random return loss performance provided the same fibre type is used. The intention is that this will be true irrespective of the manufacturing source(s) of the product.
1.3 Operating environment
The tests selected combined with the severities and durations are representative of an indoor environment typically, but not limited to, that found in generic cabling on commercial premises as defined as in ISO/IEC 11801 and EN 50173 and specified as IEC Category C.
1.4 Reliability
Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this specification does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme.
1.5 Quality assurance
Compliance with this specification does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.