DPS
Drejtoria e Përgjithshme e Standardizimit
Tel/Cel: +355 4 222 62 55
E-mail: info@dps.gov.al
Adresa: Rr.: "Reshit Collaku", (pranë ILDKPKI, kati VI), Kutia Postare 98, Tiranë - Shqipëri
Main menu

SSH ISO 2493-1:2010

Letër dhe karton - Përcaktimi i qënrueshmërisë në përkulje - Pjesa 1: Shkalla konstante e devijimit

Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection
26 tet 2017

General information

60.60     14 korr 2017

DPS

DPS/KT 172

International Standard

85.060  

anglisht  

Buying

Publikuar

Language in which you want to receive the document.

Scope

ISO 2493-1:2010 specifies procedures, based on the two-point loading principle, for determining the bending resistance of paper and board.
ISO 2493-1:2010 applies to the measurement of the bending resistance within the range 20 mN to 10 000 mN. It is not applicable to corrugated board but can be applicable to the components of such board.
The bending angle is 15° and the bending length is 50 mm.
For samples having a bending resistance that is too low to measure with a bending length of 50 mm, a shorter bending length, i.e. 10 mm, can be used.
For boards that tend to be permanently deformed if bent through 15°, the half bending angle, i.e. 7,5°, can be used.

Life cycle

NOW

PUBLISHED
SSH ISO 2493-1:2010
60.60 Standard published
14 korr 2017

Related project

Adopted from ISO 2493-1:2010