SSH EN 14359:2006+A1:2010

Akumulatorë hidropneumatikë për transmesione pneumatike

Gas-loaded accumulators for fluid power applications

Scope

1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications (see 1.2).
1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators:
- bladder type;
- diaphragm type;
- piston type;
- transfer type;
- gas bottles used to provide additional gas capacity.
They consist of one or several parts joined together by a variety of mechanical means and by welding.
1.3 This European Standard applies to gas-loaded accumulators which operate with the following conditions:
- subject to an internal gauge pressure greater than 0,5 bar;
- working temperature of not lower than -50 °C and not higher than +200 °C;
- containing Group 2 liquids and gases as defined in the Pressure Equipment Directive 97/23/EC.
It does not apply to:
- accumulators for use with dangerous fluids (see NOTE 1).
NOTE 1 Fluid power applications utilize non-dangerous fluids as categorized in ISO 6743-4 in addition to an inert gas (e.g. nitrogen) which is used as the pre-charging medium.
NOTE 2 There are no design limits to the volume of the accumulator.

Related directives

Directives related to this standards.