Use the form below to find the searched projects. Enter your criteria for searching (single or in combination) in the fields below and press the button “Search”.
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
60.60 Standard published
Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements
60.60 Standard published
Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system
60.60 Standard published
Determination of flexural strength of autoclaved aerated concrete
60.60 Standard published
Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
60.60 Standard published
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson flowmeter) (ISO 13517:2020)
60.60 Standard published
Guidance on the development and use of ISO statistical publications supported by software
60.60 Standard published
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
60.60 Standard published
Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
60.60 Standard published
Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023)
60.60 Standard published
Determination of ferrite content in austenitic stainless steel castings
60.60 Standard published
Footwear - Test methods for uppers, lining and insocks - Abrasion resistance
60.60 Standard published
Coil coated metals - Test methods - Part 0: General introduction
60.60 Standard published
Coil coated metals - Test methods - Part 1: Film thickness
60.60 Standard published
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
60.60 Standard published
Coil coated metals - Test methods - Part 12: Resistance to scratching
60.60 Standard published
Shqip