SSH EN 14255-1:2006

Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace

Scope

This document specifies procedures for the measurement and assessment of personal exposures to ultraviolet (UV) radiation emitted by artificial sources, where adverse effects can not readily be excluded.
NOTE 1 Adverse effects will usually not occur in exposures caused by commonly used artificial lighting. However, exposures to very strong light sources or light sources with extended spectra may cause a health risk nevertheless.
This document applies to UV-exposures in indoor and outdoor workplaces. It does not apply to UV-exposures in leisure time.
This document does not apply to UV-exposure caused by the sun.
NOTE 2 Part 3 of this standard will deal with UV-exposure caused by the sun.
This document does not specify UV-exposure limit values. It supports the application of limit values set by national regulations or international recommendations.
This document applies to UV-exposures by artificial incoherent sources, which emit spectral lines as well as continuous spectra. This document does not apply to coherent radiation sources.
NOTE 3 Coherent optical radiation sources are covered by standards for lasers, like EN 60825-1 etc..
This document applies to UV-exposures in the wavelength band 180 nm to 400 nm.
This document does not apply to radiation exposures which concern the retina.
NOTE 4 Part 2 of this standard will address these effects.
This document does not apply to radiation emissions of products.
NOTE 5 For radiation emissions of products other standards apply, such as: EN 60335-2-27 (IEC 60335-2-27) for sunbeds, EN 60335-2-59 (IEC 60335-2-59) for insect killers and EN 12198 for radiation emissions of machinery.