SSH EN 301 489-14 V1.1.1:2002

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters

Scope

The present document, together with EN 301 489-1 [1], covers the assessment of analogue and digital transmitters,
exciters, and any associated ancillary equipment dedicated for television broadcasting services, in respect of
ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port emissions and cabinet radiation are not included in the present
document. Such technical specifications are found in the relevant product standards of ETSI for the effective use of the
radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
analogue and digital terrestrial television broadcasting transmitters and their associated ancillary equipment.
Definitions of the type of broadcast transmitters and exciters covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any specific conditions included in the present document, under which broadcast
service transmitters are typically used.
The present document may not cover those cases where a potential source of interference which is producing
individually repeated transient phenomena or a continuous phenomena is permanently present, e.g. a radar site in the
near vicinity. In such a case it may be necessary to use special protection applied to either the source of interference or
the interfered part or both.