SSH EN 300 176-1 V2.2.1:2015

Digital Enhanced Cordless Telecommunications (DECT); Test specification; Part 1: Radio

Scope

The present document (part 1) specifies tests applicable to all Digital Enhanced Cordless Telecommunications (DECT)
equipment accessing the DECT frequency band 1 880 MHz to 1 900 MHz (including provisions for testing other or
extended frequency bands as described in ETSI EN 300 175-1 [i.11] and ETSI EN 300 175-2 [1]). Part 2 of the present
multi-part deliverable [i.15] specifies tests applicable to DECT speech and audio transmission using a collection of
speech codecs, including Recommendation ITU-T G.726 [i.7] ADPCM codec, Recommendation ITU-T G.722 [i.8]
"7 kHz codec", "MPEG-4 codec" [i.10] and others.
The aims of the present document are to ensure:
• efficient use of frequency spectrum;
• no harm done to any connected network and its services;
• no harm done to other radio networks and services;
• no harm done to other DECT equipment or its services;
• interworking of terminal equipment via the public network.
The tests of ETSI EN 300 176 are split into two parts:
• the present document (part 1) covers testing of radio frequency parameters, security elements and those DECT
protocols that facilitate the radio frequency tests and efficient use of frequency spectrum;
• part 2 [i.15] describes testing of speech and audio requirements between network interface and DECT PT, or
between a DECT CI air interface and alternatively a DECT PT or FT. Part 2 is not applicable to terminal
equipment specially designed for the disabled (e.g. with amplification of received speech as an aid for the
hard-of-hearing).
DECT terminal equipment consists of the following elements:
a) Fixed Part (FP);
b) Portable Part (PP);
c) Cordless Terminal Adapter (CTA);
d) Wireless Relay Station (WRS) (FP and PP combined);
e) Hybrid Part (HyP) (a PP with capability to act as a FP to provide PP to PP communication).