DPS
Drejtoria e Përgjithshme e Standardizimit
Phone: +355 4 222 62 55
E-mail: info@dps.gov.al
Address: Address: "Reshit Collaku" Str., (nearby ILDKPKI, VI floor), Po.Box 98, Tiranë - Albania
Main menu

ISO 10619-2:2011

Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures

Nov 24, 2011
95.99 Withdrawal of Standard   Dec 5, 2017

General information

95.99     Dec 5, 2017

ISO

ISO/TC 45/SC 1

International Standard

23.040.70  

English   French  

Buying

Withdrawn

Language in which you want to receive the document.

Scope

ISO 10619-2:2011 specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.
Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when the temperature is reduced from a standard laboratory temperature.
Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified sub-ambient temperature. It can also be used as a routine quality control test.
Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater. This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient temperatures. This method is only suitable for hoses and tubing which are non-collapsible.

Life cycle

PREVIOUSLY

WITHDRAWN
ISO 4672:1997

NOW

WITHDRAWN
ISO 10619-2:2011
95.99 Withdrawal of Standard
Dec 5, 2017

REVISED BY

WITHDRAWN
ISO 10619-2:2017