Published
1.1 General
1.1.6 This document relies on characteristic resistances and distances which are stated in a European Technical Specification. In general the design concept is valid in the product dimensions 6 inferior, or equal, to hef/dnom inferior, or equal, to 20. The actual range for a particular fastener may be taken from the relevant European Technical Specification. In minimum the following characteristics should be given in the relevant European Technical Specification as base for the design method of this CEN/TS.
- NRk,s, VRk,s
- (...)
- (...)
- ccr,N, scr,N
- ccr,sp, scr,sp
- cmin, smin
- hmin
- limitations on concrete strength classes of base material
- kcr, kucr, kT, k2, k3, k4, k8
- dnom, hef, lf , limitations on hef/dnom
- yMi, recommended partial factors see CEN/TS 1992-4-1:2009, clause 4
Directives related to this standards.
Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
PUBLISHED
DS CEN/TS 1992-4-5:2009
60.60
Standard published
Jun 17, 2015
Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.
Shqip