SSH EN 1218-4:2004

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)

Scope

This European Standard specifies the requirements and/or measures to remove the hazards and/or limit the risks on edge banding machines fed by chain(s) where the loading and unloading is manual and where the maximum work-piece height capacity is 75 mm. The machine is designed to process in one pass, one end (single end machine) or both ends (double end machine) of solid wood, chipboard, fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings. The work-piece is fed through the processing units by an integrated feed. For the purpose of this European Standard an edge banding machine fed by chain(s) is hereinafter referred to as the machine.
This European Standard covers the hazards relevant to these machines as stated in clause 4.
This European Standard does not apply to single and double end edge banding machines fed by chain or chains with a complete enclosure as defined in clause 3.2.10.
This European Standard does not deal with any hazards relating to:
a) the mechanical loading of the work-piece to a single machine; or
b) a single machine being used in combination with any other machine (as part of a line); or
c) the use of tools working between the machine halves (see clause 3.1); or
d) the use of laser.
For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards related to Electro-Magnetic Compatibility (EMC).
NOTE The requirements of this European Standard apply to all machines whatever their method of control e.g. electromechanical and/or electronic.
This European Standard is primarily directed to machines which are manufactured after the date of publication by CEN.

Related directives

Directives related to this standards.