Published
This European Standard specifies a test method for the determination of Fatty Acid Methyl Ester (FAME) content in diesel fuel or domestic heating fuel by mid infrared spectrometry, which applies to FAME contents of the two measurement ranges as follows:
- range A: for FAME contents ranging from approx. 0,05 % (V/V) to approx. 3 % (V/V);
- range B: for FAME contents ranging from approx. 3 % (V/V) to approx. 20 % (V/V);
- range C: for FAME contents ranging from approx. 20 % (V/V) to approx. 50 % (V/V).
Principally, higher FAME contents can also be analyzed if diluted; however, no precision data for results outside the specified range is available at present.
This test method was verified to be applicable to samples which contain FAME conforming to EN 14214 or EN 14213. Reliable quantitative results are obtained only if the samples do not contain any significant amounts of other interfering components, especially esters and other carbonyl compounds which possess absorption bands in the spectral region used for quantification of FAME. If such interfering components are present, this test method is expected to produce higher values.
NOTE 1 For the purposes of this European Standard, the term "% (V/V)" is used to represent the volume fraction () of a material.
NOTE 2 For conversion of grams FAME per litre (g FAME/l) to volume fraction, a fixed density for FAME of 883,0 kg/m³ is adopted.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Directives related to this standards.
WITHDRAWN
SSH EN 14078:2009
PUBLISHED
SSH EN 14078:2014
60.60
Standard published
Sep 29, 2014
Shqip