SSH EN 1807:1999

Safety of woodworking machines - Band sawing machines

Scope

This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on band sawing machines with either manual or automatic loading and/or unloading, hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings. Electrically driven machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand, excluded by the scope of this European standard, are covered by the requirements of EN 61029-1 : 1995 and prEN 61029-2-5. This European Standard covers all the hazards relevant to these machines as stated in Clause 4. This European Standard does not cover the hazards related to Electromagnetic Compatibility (EMC) as required by the EMC Directive 89/336/EEC of 03-05-89. This European Standard does not apply to: - hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting; - machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. This European Standard does not cover the hazards arising from machining processes (e.g. milling and sawing) of related to associated machines e.g. canters and circular saws. This European Standard is primarily directed at machines which are manufactured after the date of issue of this standard.

Related directives

Directives related to this standards.