DPS
Drejtoria e Përgjithshme e Standardizimit
Phone: +355 4 222 62 55
E-mail: info@dps.gov.al
Address: Address: "Reshit Collaku" Str., (nearby ILDKPKI, VI floor), Po.Box 98, Tiranë - Albania
Main menu

DS CEN/TS 12977-5:2010

Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment

95.99 Withdrawal of Standard  

General information

95.99    

DPS

DPS/KT 269

Technical Specification

27.160  

Scope

This Technical Specification specifies performance test methods for control equipment. Furthermore this document contains requirements on accuracy, durability and reliability of control equipment.
The tests described in this document are limited to components delivered with or for the system by the final supplier. For the purposes of this document controller and control equipment for solar heating systems and auxiliary heaters, if part of the system, are restricted to:
a) controllers as:
1) system clocks, timers and counters;
2) differential thermostats;
3) multi-function controllers;
b) sensors as:
1) temperature sensors;
2) irradiance sensors (for short wave radiation);
3) pressure sensors;
4) level sensors;
5) flow meters; or
6) heat meters;
c) actuators as:
1) pumps;
2) solenoid and motor valves; or
3) relays.
Furthermore combinations of controllers, sensors and actuators listed above.
An additional objective of the procedures described in this document is to verify control algorithms and, together with the accuracy of sensors, to determine control parameters. In addition to verifying the functioning of a controller, its equipment and actuators, the determined parameters may be used for numerical system simulations.
Typically electrical anodes are not part of the control equipment and are not controlled by the control equipment. However, because they are electrical appliances, electrical anodes are included in this document.
This document is valid for control equipment of solar heating systems for the purpose of hot water preparation and/or space heating. If the solar system is connected to or part of a conventional heating system, the validity is extended to the entire system. In combination with the standards EN 12976-1, EN 12976-2 as well as CEN/TS 12977-1, CEN/TS 12977-2, EN 12977-3 and CEN/TS 12977-4 this document is valid for:
d) factory made solar heating systems;
a) small custom built solar heating systems;
b) (...)

Life cycle

NOW

WITHDRAWN
DS CEN/TS 12977-5:2010
95.99 Withdrawal of Standard

REVISED BY

WITHDRAWN
SSH EN 12977-5:2012

Related project

Adopted from CEN/TS 12977-5:2010

Preview

Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.

Login