DPS
Drejtoria e Përgjithshme e Standardizimit
Phone: +355 4 222 62 55
E-mail: info@dps.gov.al
Address: Address: "Reshit Collaku" Str., (nearby ILDKPKI, VI floor), Po.Box 98, Tiranë - Albania
Main menu

SSH EN 777-2:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety

Oct 29, 2009
95.99 Withdrawal of Standard   Apr 28, 2025

General information

95.99     Apr 28, 2025

DPS

DPS/KT 286

European Norm

91.140.40  

English  

Buying

Withdrawn

Language in which you want to receive the document.

Scope

This European Standard specifies the requirements and test methods for the construction, safety, classification and marking of non-domestic gas-fired overhead radiant tube heaters incorporated into a multi-burner system (called system E and referred to in the body of the text as the 'system') with each burner unit under the control of an automatic burner control system.
This standard is applicable to Type B52 and Type B53 systems (see 4.3) intended for use in other than domestic dwellings, in which the supply of combustion air and/or the evacuation of the products of combustion is achieved by mechanical means.
This standard is not applicable to:
a) systems designed for use in domestic dwelling;
b) outdoor systems;
c) systems of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference test gas);
d) systems having a draught diverter between the exhaust fan and the flue duct;
e) systems having fully pre-mixed gas and air burners in which:
1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or
2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone;
f) systems that are designed for continuous condensation within the flue system under normal operating conditions;
g) systems having combustion products evacuation ducts that are non-metallic.
This standard is applicable to systems which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.
NOTE Requirements for systems which are not intended to be type tested would need to be subject to further consideration.
Requirements concerning the rational use of energy have not been included in this European Standard.

Related directives

Directives related to this standards.

89/106/EEC

Construction products

Harmonized
90/396/EEC

Appliances burning gaseous fuels

Harmonized
2009/142/EC

Appliances burning gaseous fuels

Harmonized
305/2011

Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Harmonized

Life cycle

PREVIOUSLY

WITHDRAWN
SSH EN 777-2:2003

NOW

WITHDRAWN
SSH EN 777-2:2009
95.99 Withdrawal of Standard
Apr 28, 2025

REVISED BY

PUBLISHED
SSH EN 416:2019

Related project

Adopted from EN 777-2:2009