Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3.
The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness £ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness £ 100 mm for grade S890 and a maximum nominal thickness £ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa ) to 960 MPa1).
Directives related to this standards.
Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
WITHDRAWN
SSH EN 10025-6:2008
95.99
Withdrawal of Standard
Nov 9, 2009
PUBLISHED
SSH EN 10025-6:2004+A1:2009
Only informative sections of projects are publicly available. To view the full content, you will need to members of the committee. If you are a member, please log in to your account by clicking on the "Log in" button.
Shqip