Projects

Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)

60.60 Standard published

Thermal insulation — Moisture effects on heat transfer — Determination of thermal transmissivity of a moist material

90.93 Standard confirmed

Acoustics — Field measurements of airborne and impact sound insulation and of service equipment sound — Survey method

60.60 Standard published

Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter

90.60 Close of review

Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components

90.93 Standard confirmed

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica

90.93 Standard confirmed

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis

90.93 Standard confirmed

Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)

90.93 Standard confirmed

Dense shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing

60.60 Standard published

Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing

90.93 Standard confirmed

Dense, shaped refractory products — Test methods for products containing carbon

90.60 Close of review

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

60.60 Standard published

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of Warning

60.60 Standard published

Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks

90.93 Standard confirmed

Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash

90.92 Standard to be revised

Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 1

60.60 Standard published

Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2

60.60 Standard published

Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes

90.93 Standard confirmed