Projects

Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard

40.60 Close of voting

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling

40.60 Close of voting

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test

40.60 Close of voting

Steel and steel products - Location and preparation of samples and test pieces for mechanical testing - Amendment 1 (ISO 377:2017/Amd 1:2025)

40.60 Close of voting

Solid recovered fuels - Methods for the determination of the content of elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ti, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Sn, Tl, V, Zn) (ISO 3884:2025)

40.60 Close of voting

Metallic powders - Determination of tap density (ISO 3953:2025)

40.60 Close of voting

Agricultural machinery - Robotic feed systems - Safety (ISO 3991:2025)

40.60 Close of voting

Aerospace series - Nut, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature)/425 °C

40.60 Close of voting

Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing, in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads

40.60 Close of voting

Aerospace series - Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads

40.60 Close of voting

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)

40.60 Close of voting

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024)

40.60 Close of voting

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2025)

40.60 Close of voting

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

40.60 Close of voting

Aerospace series - Screw, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

40.60 Close of voting

Aerospace series - Screw, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated, metric - Classification: 490 MPa (at ambient temperature)/425 °C

40.60 Close of voting

Aerospace series - Steel 40CrMoV12 (1.8523) - Consumable electrode remelted - Hardened and tempered - Forgings - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa

40.60 Close of voting

Cycles - Safety requirements for bicycles - Part 9: Saddles and seat-post test methods (ISO 4210-9:2023)

60.00 Standard under publication